Siemens SIMATIC NET Manual&Nbsp;

16 Configuration Console Tool
218
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
16.2.7 Automatic Startup of Applications and Services;
Applications and services you set up on a PC station can be synchronized with the
startup of the PC station.
As soon as the PC station is operational, user applications and user services are
started.
Follow the steps below to start applications or services automatically after the
PC station has started up...
Step Activity
1. Open the “Applications” folder in the navigation area.
2. Select the ”Autostart” folder.
The applications to be started are shown in the upper list, the services to be started in the
lower list.
As default, both lists are empty.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols