A Notes for Users of Older Versions
280
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
A.3 Continued Use of Previous Project Engineering
Continued Use of Databases and Project Engineering Tools
The following table shows an overview of the previous database types and the
corresponding project engineering tools and indicates whether continued use is
possible:
Protocol Database
Type
Project
Engineering Tool
Continued Use
DP LDB COM PROFIBUS Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
FDL TXT Text Editor Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
FMS LDB COM PROFIBUS Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
S7 LDB COML S7 Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
S7 XDB STEP 7 Continued use possible, the XDB database
must be imported.
SEND/RE
CEIVE
TXT Text Editor Continued use not possible, the project
engineering must be recreated with
SIMATIC NCM PC V5.1 Service Pack 2 or
STEP 7 Version 5.1 Service Pack 2 or
higher.
TF LDB COML TF Continued use possible, as previously with
COML TF.
Note
If you want to continue using the previous project engineering tools, use the
SIMATIC NET CD 05/2000.
To Next Page
Loading...
Need help?
General
