Siemens SIMATIC S5 - Page 128

R 02/92 Programming Instructions
Setting of the zero shift (NV):
DW 170
DW 171
DW 172
DW 173
DW 174
Interrupt for NV 1 Interrupt for NV 2
s
x
x x
104
103 102 10’
10°
s
I
x x
x
10
4
I
103
I
10
2
I
10’
I
10°
I
NV 1 (Channel 1) = DW 171 and DW 172
NV 2 (Channel 2) = DW 173 and DW 174
The setpoints for the zero shift are entered in the user data block. The setting is the same as for a
normal track.
If the interrupt identifiers are set with “O”, no interrupt entry is made. If assigned with KH =
FE no
NV value is transferred. In all other cases an interrupt is entered.
1P 241 Equipment Manual
@ Siemens AG 1989, Order No.: 6ES5 998-0KD21
9–7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com