Operating Instructions
R 02/92
9) Setting up a cyclic program in OB1
– Cyclic program depending on programmable controller and task
10) Setting up the interrupt program
– Save scratchpad flags
– Evaluate interrupts with FB 157 (BEF = KB)
Scan and evaluate interrupt bit
In case of interrupt jump to your specific interrupt program
– Reload scratchpad flags
see sections to 2.3 to 2.8
2 – 18
1P
241 Equipment Manual
@SiemensA(21989, Order No.: 6ES5998-0KD21
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
