Siemens SIMODRIVE 611 universal - Page 92

3
3.2 Parameterizing using the display and operator unit
3-92
 Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
These parameters can be displayed and handled in the following ways
(example with A0081: Parameter 0081 from drive A):
Parameter display
+
–
+
–
Previous
parameter
Subsequent
parameter
+
–
P
Value display
(e.g.
the value 123
456.789)
+
+
–
+– –
P
– +
P
P
–
+
Sub–divided into H: High part
L: Low part
Display
from the 7th position
Display
up to the 6th position
+: Key +
–: Key –
P: Key P
Fig. 3-5 Handling parameters with sub–parameter and value display > 6 positions
Note
Examples: Display in
A081.0H A081.0L
 P0081:0 = 123 456.789 mm 123 456.789
 P0081:5 = –3 459.765 mm –3 459.765
Parameters with
sub–parameter
and value display
> 6 digits
3 Parameterizing the Board
01.99