Electrical installation
4.10 Other connections
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
167
Additional customer terminal block TM31 (option G61)
Description
With option G60, a TM31 interface module (customer terminal block –A60) is already
installed in the cabinet unit. A second module (–A61) provides the following additional digital
and analog inputs/outputs in the drive system:
● 8 digital inputs
● 4 bidirectional digital inputs/outputs
● 2 relay outputs with changeover contact
● 2 analog inputs
● 2 analog outputs
● 1 temperature sensor input (KTY84-130/PTC)
The second TM31 must be installed on the system side. Default settings are not provided.
Terminal Board TB30 (option G62)
Description
Figure 4-43 TB30 Terminal Board
To Next Page
Loading...
