Operation
6.6 Control via the operator panel
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
289
Control via the operator panel
6.6.1
Operator panel (AOP30) overview and menu structure
Description
The operator panel can be used for the following activities:
● Parameterization (commissioning)
● Monitoring status variables
● Controlling the drive
● Diagnosing faults and alarms
All the functions can be accessed via a menu.
Your starting point is the main menu, which you can always call up using the yellow MENU
key:
Dialog screen for the main menu:
It can be accessed at any time with the
"MENU" key.
Press "F2" or "F3" to navigate through the
me
nu options in the main menu.
Note
AOP reset
If the AOP no longer reacts, you can trigger an AOP reset by simultaneously pressing the
key and OFF buttons (longer than two seconds) and then releasing the OFF button.
To Next Page
Loading...
