Siemens SINAMICS G150 - Menu: Fault;Alarm Memory

Operation
6.6 Control via the operator panel
Converter cabinet units
294 Operating Instructions, 07/2016, A5E03347396A
6.6.4
Menu: Fault/alarm memory
When you select the menu, a screen appears containing an overview of faults and alarms
that are present.
For each drive object, the system indicates whether any faults or alarms are present. ("Fault"
or "Alarm" appears next to the relevant drive object).
In the graphic below, you can see that at least one active fault/alarm is present for the
"VECTOR" drive object. No faults/alarms are indicated for the other drive objects.
Fault/alarm memory
When you navigate to the line with active
alarms/faults and then press the F5 <Diag>
key, the system displays a screen in which
you have to select the current or old
alarms/faults.
Display diagnosis
When you navigate to the required line and
then press the F5 <OK> key, the corr
e-
sponding faults/alarms are displayed.
The list
of current faults is selected here as
an example.
Display of current faults
A maximum of eigh
t current faults are dis-
played along with their fault number and
name of the fault.
To display additional help regarding the
cause of the problem and how to solve it,
cho
ose F1 <Help>.
To acknowledge the faults, choose F5
<Ack.>. If a fault cannot be ackn
owledged,
the fault remains.