Siemens SINAMICS G150 - Further Information about Communication Via PROFIBUS DP

Operation
6.9 Communication via PROFINET IO
Converter cabinet units
352 Operating Instructions, 07/2016, A5E03347396A
6.8.4
Further information about communication via PROFIBUS DP
Further information about communication via PROFIBUS DP
For more information about communication via PROFIBUS DP, refer to "Communication via
PROFIBUS DP" in the accompanying "SINAMICS S120 Function Manual".
6.9
Communication via PROFINET IO
6.9.1
Activating online operation: STARTER via PROFINET IO
Description
Online operation with PROFINET IO is implemented using TCP/IP.
Prerequisites
● STARTER Version 4.2 or higher
● Control unit CU320-2 PN or CBE20
STARTER via PROFINET IO (example)
Figure 6-38 STARTER via PROFINET (example)
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
The PC/PG is referred here to a fixed, free IP address.
2. Settings in STARTER