Operation
6.9 Communication via PROFINET IO
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
353
3. Assigning the IP address and the name
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
4. Select online operation in STARTER.
Set the IP address in Windows XP
On the desktop, right-click on "Network environment" -> Properties -> double-click on
Network card and choose -> Properties -> Internet Protocol (TCP/IP) -> Properties -> Enter
the freely-assignable addresses.
Figure 6-39 Properties of the Internet Protocol (TCP/IP)
To Next Page
Loading...
