Electrical installation
4.10 Other connections
Converter cabinet units
172 Operating Instructions, 07/2016, A5E03347396A
Shield connection of the TB30 on the Control Unit
Figure 4-46 TB30 shield connection
The permissible bending radii for the cables must not be exceeded when the cables are
being installed.
Safety license for 1 axis (option K01)
Description
The Safety Integrated Basic functions do not require a license. A license is, however,
required for each axis with safety functions in the case of Safety Integrated Extended
functions. It is irrelevant which safety functions are used and how many.
With option K01, the Safety license for 1 axis is included on the CompactFlash Card and
activated.
The required license can optionally be ordered with the CompactFlash card.
Subsequent licensing is realized in the Internet using the "WEB License Manager" by
generating a license key:
http://www.siemens.com/automation/license
To Next Page
Loading...
