Operation
6.9 Communication via PROFINET IO
Converter cabinet units
362 Operating Instructions, 07/2016, A5E03347396A
PROFIenergy is an energy management system for production plants, based on the
PROFINET communication protocol. The functionality is certified in the PROFIenergy profile
of the PNO. Drive units which have PROFIenergy functionality, can be certified in an
approved laboratory. Certified devices support the PROFIenergy commands and respond
accordingly to the requirements and operating states.
SINAMICS supports PROFIenergy profile V1.1. PROFIenergy commands are transferred
from the controller to the drive with PROFINET data sets in acyclic operation. The
PROFIenergy commands are transferred using the PROFINET data set 0x80A0.
The following table provides an overview of the PROFIenergy functionality and the support of
the various SINAMICS devices:
Figure 6-43 PROFIenergy functions
To Next Page
Loading...
