Siemens SINAMICS G150 - Parameters

Functions, monitoring, and protective functions
9.2 Drive functions
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
503
9.2.7.4
Parameters
•
r0051
Drive data set DDS effective
•
p0130
Motor data sets (MDS) number
•
p0180
Drive data set (DDS) number
•
p0186
Motor data sets (MDS) number
•
p0819[0...2]
Copy drive data set DDS
•
p0820
BI: Drive data set selection DDS, bit 0
•
p0821
BI: Drive data set selection DDS, bit 1
•
p0822
BI: Drive dat
a set selection DDS, bit 2
•
p0823
BI: Drive data set selection DDS, bit 3
•
p0824
BI: Drive data set selection DDS, bit 4
•
p0826
Motor changeover, motor number
•
p0827
Motor changeover status word bit number
•
p0828
Motor changeover, feedback signal
•
r0830
Mo
tor changeover, status
•
p0831
Motor changeover, contactor feedback signal
•
p0833
Data set changeover configuration