Maintenance and servicing
11.3 Maintenance
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
615
Installation device
Description
The installation device is used for installing and removing the power blocks.
It is used as an installation aid, which is placed in front of and secured to the module. The
telescopic guide support allows the withdrawable device to be adjusted according to the
height at which the power blocks are installed. Once the mechanical and electrical
connections have been removed, the power block can be removed from the module,
whereby the power block is guided and supported by the guide rails on the withdrawable
devices.
Figure 11-1 Installation device
The article number for the installation device is 6SL3766-1FA00-0AA0.
To Next Page
Loading...
