Siemens SINAMICS G150 - Digital Outputs

Output terminals
8.3 Digital outputs
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
473
8.3
Digital outputs
Description
Four bi-directional digital outputs (terminal X541) and two relay outputs (terminal X542) are
available. These outputs are, for the most part, freely parameterizable.
Signal flow diagram
Figure 8-2 Signal flow diagram: Digital outputs
Delivery condition
Table 8- 3 Digital outputs, delivery condition
Digital output
Terminal
Delivery condition
DO0
X542: 2,3
"Enable pulses"
DO1
X542: 5,6
"No fault"
DI/DO8
X541: 2
"Ready to start"
DI/DO9
X541: 3
DI/DO10
X541:4
DI/DO11
X541: 5