Electrical installation
4.10 Other connections
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
191
Note
Insertion direction for the memory card
Only insert the memory card as shown in the photo above (arrow at top right).
Memory card damage caused by electric fields or electrostatic discharge
Electrical fields or electrostatic discharge may result in the memory card being damaged
and so cause malfunctions.
• When removing and inserting the memory card, always observe the ESD regulations.
Note
Possible data loss when returning the Control Unit with memory card
When returning a defective Contro
l Unit for repair or testing, the data on the memory card
(parameters, firmware, licenses, etc.) could be lost.
Do not return the memory card as well, but rather keep it in a safe place so that it can be
inserted in the replacement unit.
te that only SIEMENS memory cards can be used to operate the Control Unit.
To Next Page
Loading...
