Commissioning
5.3 Procedure for commissioning with STARTER
Converter cabinet units
200 Operating Instructions, 07/2016, A5E03347396A
Accessing the STARTER project wizard
Figure 5-2 Main screen of the STARTER parameterization and commissioning tool
Hide STARTER Getting Started commissioning drive using
The online help can be permanently hidden by deselecting
Options > Settings > Workbench
> Display "Getting Started" when starting
Note
Project wizard
When you deactivate the Display wizard during start
checkbox, the project wizard is no
longer displayed the next time you start STARTER.
You can call up the project wizard by choosing Project > New with Wizard
.
The online help can be opened again at any time using Tools > Settings > Workbench >
Display "Getting Started" when starting
STARTER features a detailed online help function.
To Next Page
Loading...
