Siemens SINAMICS G150 - Page 229

Commissioning
5.3 Procedure for commissioning with STARTER
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
229
Configuring a web server
Figure 5-30 Configuring a web server
⇒
Configure the web server.
The Web server is activated in the factory setting.
Activate and deactivate the web server under
Activate web server
.
Select
Only allow access via secure connection (https)
if necessary.
Note
Industrial Security
Observe the notes on industrial security.
⇒
Click
Continue >
.