Commissioning
5.3 Procedure for commissioning with STARTER
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
239
11.The SINAMICS drive is displayed as drive object in the project navigator.
12.You can now configure the drive unit (see Chapter "Configuring the drive unit").
Note
Storage location of the IP address
The IP address and d
evice name are stored on the memory card of the Control Unit (non-
Parameters can also be used to modify and/or display the properties of the Ethernet
interface.
p8900
p8901
E IP address of station
p8902
IE default gateway of station
p8903
IE subnet mask of station
p8904
p8905
IE interface configuration
r8910
IE name of station active
r8911
IE IP address of station active
r8912
IE default gateway of statio
n active
r8913
IE subnet mask of station active
r8914
IE DHCP mode of station active
r8915
IE MAC address of station
To Next Page
Loading...
