Siemens SINAMICS G150 - Page 35

Device overview
2.5 Type plate
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
35
Explanation of the option short codes
Table 2- 2 Explanation of the option short codes
Line-side options
L00 Line filter for use in the first environment according to EN 61800-3, category C2
(TN/TT systems with grounded neutral point)
L21 Surge suppression
L23
Line reactor uk = 2%
Motor-side options
L07
dv/dt filter compact plus Voltage Peak Limiter
L08
Motor reactor
L10
dv/dt filter plus Voltage Peak Limiter
Line-side and motor-side options
M70
EMC shield bus
Motor protection and safety functions
L45
EMERGENCY OFF pushbutton installed in the cabinet door
L57
EMERGENCY OFF category 0, 230 VAC or 24 VDC
L59
EMERGENCY STOP category 1, 230 VAC
L60
EMERGENCY STOP category 1, 24 VDC
L83
Thermistor motor protection unit (alarm)
L84
Thermistor motor protection unit (shutdown)
L86
PT100 evaluation unit
L87
Insulation monitoring
Increase in degree of protection
M21
Degree of protection IP21
M23 Degree of protection IP23
M43
Degree of protection IP43
M54 Degree of protection IP54
Mechanical options
M06
Base 100 mm high, RAL 7022
M07
Cable compartment 200 mm high, RAL 7035
M90
Crane transport assembly (top-mounted)
Safety Integrated
K01
Safety license for 1 axis
K52
Additional SMC30 Sensor Module
K82
Terminal Module for controlling the "Safe Torque Off" and "Safe Stop 1" safety functions
K87
TM54F Terminal Module
K88
SBA Safe Brake Adapter 230 VAC