Maintenance and servicing
11.4 Replacing components
Converter cabinet units
626 Operating Instructions, 07/2016, A5E03347396A
To reinstall, perform the above steps in the reverse order.
Note
Specifications for the installation
The tightening torque
s specified in the table "Tightening torques for screw connections" must
Carefully insert the plug
-in connections and ensure that they are secure.
Note
Connection clip to the interference-suppression capacitor
The connection clip to the in
terference-
suppression capacitor is mounted on the spare power
block together with a yellow warning label.
Please note the information in Chapter "Removing the connection clip to the interference
-
suppression capacitor for operation on an ungrounded line s
upply (IT system)".
To Next Page
Loading...
