Siemens SINUMERIK 802D sl Programming Manual

Enhanced Level Commands
4.1 Program support functions (1)
04.07
4-104
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Tool offset
Tool offsets are ignored in the canned cycle mode.
Example
M3 S1500; Rotate spindle
G90G0Z100
G90 G99 G81 X200. Y--150. Z--100. R50. F120.;
Position, drill hole 1, and return to point R.
Y--500.; Position, drill hole 2, and return to point R.
Y--700.; Position, drill hole 3, and return to point R.
X950.; Position, drill hole 4, and return to point R.
Y--500.; Position, drill hole 5, and return to point R.
G98 Y--700.; Position, drill hole 6, and return to the initial level.
G80; Cancel canned cycle
G28 G91 X0 Y0 Z0; Return to the reference position return
M5; Spindle stop

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English