Siemens SINUMERIK 802D sl - Page 163

Enhanced Level Commands
4.10 Macroprograms
04.07
4-163
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
N3000 G291
N3010 G123
;alarm 12470, as G123 is no G
;function and a macro call is
;not possible as long as the macro is
;active. Exeption: The macro was
;calledupassubroutinewithCALL
;MAKRO_G123