Siemens SINUMERIK 802D sl Programming Manual

Abbreviations
04.07
A-172
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
CRC Cutter Radius Compensation
CSF Control System Flowchart (PLC programming method)
CTS Clear To Send (serial data interfaces)
CUTOM Cutter Radius Compensation (Tool radius compensation)
DB Data Block in the PLC
DBB DataBlockByteinthePLC
DBW Data Block Word in the PLC
DBX Data Block Bit in the PLC
DC Direct Control: The rotary axis is moved along the shortest path to
the absolute position within one revolution.
DCE Data Communications Equipment
DDE Dynamic Data Exchange
DIO Data Input/Output: Data transfer display
DIR Directory
DLL Dynamic Link Library: Module which can be accessed by a running
program. Often contains program sections that are required by
different programs.
DOS Disk Operating System
DPM Dual--Port Memory
DPR Dual--Port RAM
DRAM Dynamic Random Access Memory

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English