Siemens SINUMERIK 802D sl Programming Manual

Table of Contents
04.07
viii
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
3.2.3 Scaling (G50, G51) 3-61..............................................
3.2.4 Programmable mirror image (G50.1, G51.1) 3-64........................
3.2.5 G60: Oriented positioning 3-66........................................
3.3 T ime-controlling commands 3-67.......................................
3.3.1 Dwell (G04) 3-67....................................................
3.4 Cutting feedrate control 3-68..........................................
3.4.1 Automatic corner override G62 3-68....................................
3.4.2 Compressor in ISO dialect mode 3-71..................................
3.4.3 Exact stop (G09, G61), cutting mode (G64), tapping mode (G63) 3-72......
3.5 Tool offset functions 3-73.............................................
3.5.1 Tool offset data memory 3-73..........................................
3.5.2 Tool length offset (G43, G44, G49) 3-73................................
3.5.3 Cutter radius compensation (G40, G41, G42) 3-76.......................
3.5.4 Collision monitoring 3-81..............................................
3.6 S, T, M, and B functions 3-86..........................................
3.6.1 Spindle function (S function) 3-86......................................
3.6.2 Tool function (T function) 3-87.........................................
3.6.3 Miscellaneous function (M function) 3-87................................
3.6.4 Internally processed M codes 3-88.....................................
3.6.5 Macro call via M function 3-88.........................................
3.6.6 General purpose M codes 3-89........................................
4 Enhanced Level Commands 4-91.............................................
4.1 Program support functions (1) 4-91.....................................
4.1.1 Canned cycles (G73 to G89) 4-91......................................
4.1.2 High--speed peck drilling cycle (G73) 4-98...............................
4.1.3 Fine boring cycle (G 76) 4-99..........................................
4.1.4 Drilling cycle, spot drilling (G81) 4-103...................................
4.1.5 Drilling cycle, counter boring cycle (G82) 4-105...........................
4.1.6 Peck drilling cycle (G83) 4-107..........................................
4.1.7 Boring cycle (G85) 4-109..............................................
4.1.8 Boring cycle (G86) 4-111..............................................
4.1.9 Boring cycle, back boring cycle (G87) 4-113..............................
4.1.10 Drilling cycle (G89), retract using G01 4-116..............................
4.1.11 Rigid tapping cycle (G84) 4-118.........................................
4.1.12 Left--handed rigid tapping cycle (G74) 4-121..............................
4.1.13 Peck tapping cycle (G84 or G74) 4-124..................................
4.1.14 Canned cycle cancel (G80) 4-127.......................................
4.1.15 Program example using tool length offset and canned cycles 4-128..........
4.1.16 Multiple threads with G33 4-130.........................................
4.1.17 Threads with variable lead (G34) 4-131..................................
4.2 Programmable data input (G10) 4-132...................................
4.2.1 Changing of tool offset value 4-132......................................
4.2.2 Setting the workpiece coordinate system shift data 4-132...................
4.3 Subprogram call up function (M98, M99) 4-133...........................
4.4 Eight--digit program number 4-134......................................
4.5 Polar coordinate command (G15, G16) 4-136.............................
4.6 Polar coordinate interpolation (G12.1, G13.1) 4-137.......................

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English