Siemens SINUMERIK 828D

Tables
16.1 Instructions
Job planning
712 Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Operation Meaning W
1)
Description see
2)
AROT Programmable rotation s PGsl
AROTS Programmable frame rotations with solid
angles
s PGsl
AS Macro definition PGAsl
Macro technique (DEFINE ... AS) (Page 203)
ASCALE Programmable scaling s PGsl
ASIN Arithmetic function, arc sine PGAsl
Arithmetic functions (Page 63)
ASPLINE Akima spline m PGAsl
Spline interpolation (ASPLINE, BSPLINE, CSPLINE,
BAUTO, BNAT, BTAN, EAUTO, ENAT, ETAN, PW,
SD, PL) (Page
234)
ATAN2 Arc tangent 2 PGAsl
Arithmetic functions (Page 63)
ATOL Axis-specific tolerance for compressor
functions, orientation smoothing and
smoothing types
PGAsl
Programmable contour/orientation tolerance (CTOL,
OTOL, ATOL) (Page 490)
ATRANS Additive programmable translation s PGsl
AX Variable axis identifier m/s PGAsl
Axis functions (AXNAME, AX, SPI, AXTOSPI, ISAXIS,
AXSTRING, MODAXVAL) (Page 661)
AXCTSWE Advance container axis PGAsl
Axis container (AXCTSWE, AXCTSWED) (Page 669)
AXCTSWED Rotate axis container PGAsl
Axis container (AXCTSWE, AXCTSWED) (Page 669)
AXIS Axis identifier, axis address PGAsl
Definition of user variables (DEF) (Page 23)
AXNAME Converts input string into axis identifier PGAsl
Axis functions (AXNAME, AX, SPI, AXTOSPI, ISAXIS,
AXSTRING, MODAXVAL) (Page 661)
AXSTRING Converts string spindle number PGAsl
Axis functions (AXNAME, AX, SPI, AXTOSPI, ISAXIS,
AXSTRING, MODAXVAL) (Page 661)
AXTOCHAN Request axis for a specific channel.
Possible from NC program and
synchronized action.
PGAsl
Transfer axis to another channel (AXTOCHAN)
(Page 130)
AXTOSPI Converts axis identifier into a spindle
index
PGAsl
Axis functions (AXNAME, AX, SPI, AXTOSPI, ISAXIS,
AXSTRING, MODAXVAL) (Page
661)
B Axis name m/s PGAsl
Programming of the tool orientation (A..., B..., C...,
LEAD, TILT) (Page 323)