Tables
16.1 Instructions
Job planning
732 Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Operation Meaning W
1)
Description see
2)
G751 Approach fixed point via intermediate
point
s PGsl
G810
3)
, ...,
G819
G group reserved for the OEM user
PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page 272)
G820
3)
, ...,
G829
G group reserved for the OEM user
PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page 272)
G931 Feedrate specified by traversing time m
G942 Freeze linear feedrate and constant
cutting rate or spindle speed
m
G952 Freeze revolutional feedrate and
constant cutting rate or spindle speed
m
G961 Constant cutting rate and linear
feedrate
m
PGsl
G962 Linear or revolutional feedrate and
constant cutting rate
m
PGsl
G971 Freeze spindle speed and linear
feedrate
m
PGsl
G972 Freeze linear or revolutional feedrate
and constant spindle speed
m
PGsl
G973 Revolutional feedrate without spindle
speed limitation
m
PGsl
GEOAX Assign new channel axes to geometry
axes 1 - 3
PGAsl
Replaceable geometry axes (GEOAX) (Page 664)
GET Replace enabled axis between
channels
PGAsl
Axis replacement, spindle replacement (RELEASE,
GET, GETD) (Page 125)
GETACTT Gets active tool from a group of tools
with the same name
FBW
GETACTTD Gets the T number associated with an
absolute D number
PGAsl
Free assignment of D numbers: Determine T number to
the specified D number (GETACTTD) (Page
432)
GETD Replace axis directly between channels
PGAsl
Axis replacement, spindle replacement (RELEASE,
GET, GETD) (Page 125)
GETDNO Returns the D number of a cutting edge
(CE) of a tool (T)
PGAsl
Free assignment of D numbers: Rename D numbers
(GETDNO, SETDNO) (Page 431)
GETEXET Reading of the loaded T number
FBW
GETFREELOC Find a free space in the magazine for a
given tool
FBW
GETSELT Return selected T number
FBW
GETT Get T number for tool name
FBW
To Next Page
Loading...
