Siemens SINUMERIK 828D

Tables
16.1 Instructions
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
737
Operation Meaning W
1)
Description see
2)
M2 End of main program with return to
beginning of program
PGsl
M3 CW spindle rotation PGsl
M4 CCW spindle rotation PGsl
M5 Spindle stop PGsl
M6 Tool change PGsl
M17 End of subprogram PGsl
M19 Spindle positioning to the position
entered in SD43240
PGsl
M30 End of program, same effect as M2 PGsl
M40 Automatic gear change PGsl
M41 ... M45 Gear stage 1 ... 5 PGsl
M70 Transition to axis mode PGsl
MASLDEF Define master/slave axis grouping PGAsl
Master/slave group (MASLDEF, MASLDEL, MASLON,
MASLOF, MASLOFS) (Page 545)
MASLDEL Uncouple master/slave axis grouping
and clear grouping definition
PGAsl
Master/slave group (MASLDEF, MASLDEL, MASLON,
MASLOF, MASLOFS) (Page 545)
MASLOF Deactivation of a temporary coupling PGAsl
Master/slave group (MASLDEF, MASLDEL, MASLON,
MASLOF, MASLOFS) (Page
545)
MASLOFS Deactivation of a temporary coupling
with automatic slave axis stop
PGAsl
Master/slave group (MASLDEF, MASLDEL, MASLON,
MASLOF, MASLOFS) (Page 545)
MASLON Activation of a temporary coupling PGAsl
Master/slave group (MASLDEF, MASLDEL, MASLON,
MASLOF, MASLOFS) (Page 545)
MATCH Search for string in string PGAsl
Search for character/string in the string (INDEX,
RINDEX, MINDEX, MATCH) (Page 81)
MAXVAL Larger value of two variables (arithm.
function)
PGAsl
Variable minimum, maximum and range (MINVAL,
MAXVAL and BOUND) (Page
70)
MCALL Modal subprogram call PGAsl
Modal subprogram call (MCALL) (Page 188)