Siemens SINUMERIK 828D

Tables
16.1 Instructions
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
739
Operation Meaning W
1)
Description see
2)
N NC auxiliary block number PGsl
NCK Specify validity range for data PGAsl
Definition of user variables (DEF) (Page 23)
NEWCONF Apply modified machine data
(corresponds to "Activate machine
data")
PGAsl
Activate machine data (NEWCONF) (Page 132)
NEWT Create new tool PGAsl
Reading and changing frame components (TR, FI, RT,
SC, MI) (Page 290)
NORM
3)
Standard setting in starting point and
end point with tool offset
m PGsl
NOT Logic NOT (negation) PGAsl
Comparison and logic operations (Page 66)
NPROT Machine-specific protection zone
ON/OFF
PGAsl
Activating/deactivating protection zones (CPROT,
NPROT) (Page 221)
NPROTDEF Definition of a machine-specific
protection zone
PGAsl
Definition of the protection zones (CPROTDEF,
NPROTDEF) (Page 217)
NUMBER Convert input string to number PGAsl
Type conversion from STRING (NUMBER, ISNUMBER,
AXNAME) (Page 76)
OEMIPO1 OEM interpolation 1 m PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page 272)
OEMIPO2 OEM interpolation 2 m PGAsl
Special functions for OEM users (OEMIPO1,
OEMIPO2, G810 to G829) (Page
272)
OF Keyword in CASE branch PGAsl
Program branch (CASE ... OF ... DEFAULT ...)
(Page 89)
OFFN Allowance on the programmed contour m PGsl
OMA1 OEM address 1 m
OMA2 OEM address 2 m
OMA3 OEM address 3 m
OMA4 OEM address 4 m
OMA5 OEM address 5 m
OR Logic operator, OR operation PGAsl
Comparison and logic operations (Page 66)