Siemens SINUMERIK 828D Programming Manual

Tables
16.1 Instructions
Job planning
754 Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Operation Meaning W
1)
Description see
2)
TOROT Align the Z axis of the workpiece
coordinate system parallel to the
workpiece orientation by rotating the
frame
m PGsl
TOROTOF Frame rotations in tool direction OFF m PGsl
TOROTX Align the X axis of the workpiece
coordinate system parallel to the
workpiece orientation by rotating the
frame
m PGsl
TOROTY Align the Y axis of the workpiece
coordinate system parallel to the
workpiece orientation by rotating the
frame
m PGsl
TOROTZ As TOROT m PGsl
TOUPPER Convert the letters of a string into
uppercase
PGAsl
Conversion to lower/upper case letters (TOLOWER,
TOUPPER) (Page 79)
TOWBCS Wear values in basic coordinate system
(BCS)
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page
400)
TOWKCS Wear values in the coordinate system
of the tool head for kinetic
transformation (differs from machine
coordinate system through tool rotation)
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page 400)
TOWMCS Wear values in machine coordinate
system
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page
400)
TOWSTD Initial setting value for offsets in tool
length
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page
400)
TOWTCS Wear values in the tool coordinate
system (toolholder ref. point T at the
tool holder)
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page
400)
TOWWCS Wear values in workpiece coordinate
system
m PGAsl
Coordinate system of the active machining operation
(TOWSTD, TOWMCS, TOWWCS, TOWBCS,
TOWTCS, TOWKCS) (Page 400)
TR Offset component of a frame variable PGAsl
Reading and changing frame components (TR, FI, RT,
SC, MI) (Page 290)
TRAANG Transformation inclined axis PGAsl
Inclined axis (TRAANG) (Page 372)

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash