No. Parameter
mask
Parameter
internal
Data type Meaning
30 <_DMODE> INT Display mode
UNITS: Machining plane G17/G18/G19
0 = Compatibility, the plane effective
before the cycle call remains ac‐
tive
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
TENS: Technology mode
1 = Stock removal along the contour
2 = Contour grooving
3 = Groove turning
HUNDREDS: Machine residual material
0 = No
1 = Yes
THOUSANDS: --- Reserved
TEN THOUSANDS: Technology scaling in cycle screen forms
(Page 1153)
0 = Input: Complete
1 = Input: Simple
HUNDRED THOUSANDS: Automatic program name
0 = No
1 = Yes
Work preparation
3.25 Programming cycles externally
NC programming
1128 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
To Next Page
Loading...
Need help?
General
