Siemens SINUMERIK User Manual

Programming and Operating Manual (Turning)
01/2017
247
Copying, cutting, and pasting programs
1.
Select the program management operating ar
ea.
2.
Open the desired directory.
3.
Select t
he program file that you would like to copy or cut.
4.
Perform either of the following operations as desired:
•
Press this softkey to copy the selected file:
•
Press the following softkeys to cut the selected file:
→
5.
Select the target directory with the horizontal softkeys.
6.
Press this softkey to paste the file from the clipboard to the current directory.
Deleting/restoring programs
1.
Select the program management operating area.
2.
Open the desired directory.
3.
Select the program file that you would like to delete.
4.
Press this key, and the following message appears on th
e screen:
5.
Press this softkey to confirm the deletion.
6.
If you want to restore the last deleted file(s), press this softkey.

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe