Siemens SINUMERIK User Manual

Programming and Operating Manual (Turning)
01/2017
73
5.
Press this softkey to confirm and the archive information dialog box opens.
6.
Specify the properties of the archive and press this softkey. The c
ontrol system starts crea-
tion of the startup archive.
Note
Do not remove the USB stick in the process of data backup if you choose USB as the target directory.
Pressing <CTRL + S> when you are in any operating area (on PPU161.3 and PPU160.2 only) creat
es a startup archive on
the connected USB stick. In addition, it automatically saves the action log to the USB stick.
Restoring a startup archive
+
1.
Select the system data operating area.
2.
Press this softkey to open the startup archive window.
3.
Select the following option and press this softkey to restore the startup archive:
4.
Select the backup path to locate the archive file and press this softkey to confirm.
5.
Press this softkey to confirm the archive information.
6.
Press this softkey to continue and start restoring the startup archive. The control system
restarts to complete restoring the archive.
10.9.2.2
External data backup of separate files
Backing up files by copying and pasting
In the program management operating area, program files or directories can be copied into another directory or onto a
different drive by means of copying and pasting operations.
Operating sequence
1.
Select the program management operating area.
2.
Enter the program directory.
3.
Select the program file or directory to be backed up.
4.
Press this softkey to copy the file to the clipboard.
5.
Select a desired directory or drive as the data target.

Siemens SINUMERIK Specifications

General

Brand	Siemens
Model	SINUMERIK
Category	Control Unit
Language	English