Siemens SINUMERIK User Manual

Programming and Operating Manual (Turning)
50 01/2017
3.
Position the cursor bar on the input field to be modified.
4.
Switch to incremental input.
5.
Enter the desired increment value, for example, 0.1.
•
Positive value: the tool compensates in a direction of moving away from the workpiece.
•
Negative value: the tool compensates in a direction of approaching the workpiece.
Note:
Alternatively, you can call the pocket calculator to work out the increment value (see Steps
7 to 10).
6.
Press this key or move the cursor to activate the compensation. Then the value displayed in
the input field becomes the sum of the original value and the incr
ement value.
7.
If you desire to use the pocket calculator, press this key.
8.
Enter the desired arithmetic statement in the input line of the pocket calculator.
9.
Press this key and the calculat
ion result (for example, 0.1) is displayed in the pocket calcu-
lator:

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe