Mounting
7.2 Mounting
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
181
Mounting on mounting plate / wall mounting
Screw mounting size S00
The following figure shows the mounting of a contactor of size S00 on a base plate or a
panel.
Using two M4 screws, plain washers, and spring washers, screw the contactor tight into the
designated drill holes diagonally.
Maximum tightening torque 1.2 to 1.6 Nm
To Next Page
Loading...
