Accessories
9.23 Terminal module for contactors with screw connections
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
362 Manual, 09/2017, A5E03656507120A/RS-AE/006
Mounting
Mounting the terminal module for contactors with screw connections
Plug the adapter pin into the contactor from below.
Insert the plug into the openings on the adapter from the front, until it engages.
Screw the terminal module tight with a screwdriver.
Note
Proceed in the same way to mount the terminal module on size S0 contactors.
Note
Replace the contactor and the a
dapter together when end of service life is reached.
To Next Page
Loading...
