Accessories
9.19 Link module for two contactors in series
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
354 Manual, 09/2017, A5E03656507120A/RS-AE/006
Link module for two contactors in series
9.19.1
The link module for 2 contactors in series is a module used to connect two contactors in
series. It is used in Safety applications, for example, where two switching points located in
series are required.
The link module for 2 contactors in series is available in the following versions.
Table 9- 33 Versions of the link module
S0 3RA2926-1A
Mounting
Mounting the link module for 2 contactors in series (size S00)
Insert the pins of the link module into the contactor's terminal openings from above until they
are securely in position. Make sure that the wedge (a) engages in the groove (b) provided on
the contactor for this purpose.
To Next Page
Loading...
