Accessories
9.3 Auxiliary switch blocks
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
284 Manual, 09/2017, A5E03656507120A/RS-AE/006
The procedures for mounting and disassembling auxiliary switch blocks for mounting on the
front and laterally are described below.
Mounting the front-side 2- / 4-pole auxiliary switch block (sizes S00 / S0 / S2 / S3)
The following illustration shows an example of mounting size S00.
Sizes S0 / S2 / S3 are mounted in the same way.
Push the auxiliary switch, which can be mounted on the front, into the location hole on the
contactor. Pull it down until it engages.
To Next Page
Loading...
