Siemens SIRIUS 3RT - Replacing Solenoid Coils; Replacing Solenoid Coils for Size S0

Mounting
7.3 Replacing solenoid coils
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
188 Manual, 09/2017, A5E03656507120A/RS-AE/006
7.3
Replacing solenoid coils
7.3.1
Replacing solenoid coils for size S0
The solenoid coils on size S0 to S12 contactors can be replaced. The illustration below
shows how to replace the solenoid coil on a size S0 contactor with an AC coil.
Note
On size S0, the solenoid coils can only be replaced for AC devices.
Replacing a solenoid coil (size S0/AC)
①
Use a screwdriver to lift up the retaining clips between the rear and front halves of the
contactor.