Accessories
9.13 Coil terminal module
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
344 Manual, 09/2017, A5E03656507120A/RS-AE/006
Mounting
Mounting the coil connection module using the example of size S0 contactors
Below is an example of how to mount the 3RT2926-4RA11 coil terminal module (coil
terminal from above) onto a 3RT2 power contactor of size S0.
Sizes S2 / S3 are mounted in the same way.
Attach the coil terminal module onto the contactor from above until it engages.
Open the cover on the front panel of the contactor.
Thread the cables from above into coil terminal A1 of the contactor.
Insert the cable into the cable channel.
Thread the cables from below into coil terminal A2 of the contactor.
To Next Page
Loading...
