Accessories
9.6 OFF-delay device
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
321
The 3RT2916-. OFF-delay devices are available with the following mounting types:
● Screwing onto a mounting plate
● Snapping onto a 35 mm DIN rail according to IEC 60715.
Mounting on mounting plate
The illustrations below depict screw mounting for sizes S00 to S3:
Screw mounting (sizes S00 to S3)
Using two M4 screws (maximum tightening torque 1.2 to 1.6 Nm), plain washers, and spring
washers, screw the OFF-delay device tight into the designated drill holes diagonally.
To Next Page
Loading...
