Accessories
9.6 OFF-delay device
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
322 Manual, 09/2017, A5E03656507120A/RS-AE/006
Snapping onto DIN rail (snap-on mounting)
Breaking delay devices of sizes S00 to S3 can be snapped onto a 35-mm standard mounting
rail.
The illustrations below show how to snap OFF-delay devices onto/off a DIN rail:
Mounting / disassembling sizes S00 to S3 (snap-on mounting)
Position the device on the top edge of the DIN rail and press down until it snaps onto the
bottom edge of the DIN rail.
To disassemble the device, press it down, pushing against the mounting springs, and swivel
To Next Page
Loading...
