Accessories
9.3 Auxiliary switch blocks
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
293
The procedures for mounting and disassembling auxiliary switch blocks for mounting on the
front and laterally are described below.
Mounting the front-side 2- / 4-pole auxiliary switch block
Push the auxiliary switch, which can be mounted on the front, into the location hole on the
contactor. Pull it down until it engages.
Disassembling the front-mounted auxiliary switch - 2- / 4-pole auxiliary switch block
Activate the release lever on the auxiliary switch block.
Push the auxiliary switch block up and pull it forward to remove it from the contactor.
Note
The procedure for mounting/disasse
mbling the 1-pole auxiliary switch block on the front is
To Next Page
Loading...
