Siemens SIRIUS 3RT - 3 RA27 Function Modules for Connection to the Automation Level (AS-Interface or IO- Link); Description

Accessories
9.24 3RA27 function modules for connection to the automation level (AS-Interface or IO-Link)
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
363
9.24
3RA27 function modules for connection to the automation level (AS-
Interface or IO-Link)
9.24.1
Description
Special SIRIUS 3RT2 contactor versions with voltage tapping (3RT2...-....-0CC0) are
required to simply connect SIRIUS switching devices to the controller level (PLC) using
3RA27 function modules.
The function modules enable connection to the AS-Interface or IO-Link communication
solutions.
The function modules are available for the following contactors and contactor assemblies.
Table 9- 39 Overview - 3RA27 function modules
AS-Interface
IO-Link
Direct-on-line start
3RA2712- . AA00
3RA2711- . AA00
Reversing start 3RA2712- . BA00 3RA2711- . BA00
Star-delta (wye-delta) start
3RA2712- . CA00
3RA2711- . CA00
Note
N
o further auxiliary switch blocks may be mounted on the basic devices when using the
3RA27
function modules.
Note
Sizes S00 to S3
Sizes
S00 to S3 use the same function modules.
Reference
More information ...
Can be found in the manuals ...
About the 3RA27
function modules for connection
to the automation level
• "Function Modules for AS-Interface"
(http://support.automation.siemens.com/WW/
view/en/39318922) (3ZX1012-0RA27-0AC0)
• "Function Modules for IO-Link"
(http://support.automation.siemens.com/WW/
view/en/39319600) (3ZX1012-0RA27-1AC1)