Mounting
7.2 Mounting
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
186 Manual, 09/2017, A5E03656507120A/RS-AE/006
Mounting / disassembling sizes S2 (snap-on mounting)
Size S2 contactors can be snapped onto a 35 mm DIN rail according to IEC 60715.
Position the device on the top edge of the mounting rail and press it down until it snaps onto
the bottom edge of the rail.
To disassemble, press the locking device down with a screwdriver.
Press the device down, pushing against the mounting springs, and swivel the device to
To Next Page
Loading...
