Siemens SIRIUS 3RW44 - Page 136

PROFIBUS DP Communication Module
SIRIUS 3RW44 manual
8-12 GWA 4NEB 535 2195-02 DS 06
5. In order to permanently save the settings, proceed as follows:
Notice
If the parameter "Parameters disabled CPU/Master" is set to "Off" (factory setting) in the
menu "Field bus", the parameters set on the soft starter will be overwritten with the values
stored in the GSD data or in the OM when the bus is started. If this is not desired, the
parameter must be set to "On".
Station address
select
4
change
23
ESC OK
Fieldbus
select
10
select
ESC OK
Saving
select execute
ESC OK
options
10
11
Function call
select execute
ESC
OK
Save
1
settings
Save
select
1
Yes
settings
execute?
ESC
OK
SIEMENS
Menu
3RW44
ESC OK