Siemens SIRIUS 3RW44 - Page 256

SIRIUS 3RW44 manual
Index-2 GWA 4NEB 535 2195-02 DS 06
Installation altitude 2-6
Internal run-up recognition 6-3, 6-5
L
Limiting torque 6-5
Line contactor 9-3
Line voltage 3-6
M
Main circuit 9-2
Main contactor 3-8
Main current connection 3-11
Maximum pointer 8-37
Maximum starting time 6-3
Menu structure 5-2, 10-2
Messages 7-2
Motor control 5-43
Motor data 5-11
motor heat build-up 6-20
Motor heating 5-19, 6-10
Motor overload protection 6-19
Motor protection function 6-19
Motor protection settings 5-31
Motor starter configuration 8-15
Mounting Dimensions 3-3
Mounting position 3-2
N
Navigation 5-2
Normal or Heavy Starting 2-3
Normal starting 2-3
O
On-time motor 2-5
Operating and monitoring module, see
display 2-2
Overtemperature 7-5
P
Parameter 5-2
Parameter sets 5-10, 6-2
Parameterizing the inputs 5-28
Parameterizing the outputs 5-29
PC interface 2-2
Phase loss 7-3
PLC 3-4, 4-2, 5-43, 7-6, 8-37, 8-41, 8-49,
8-51, 8-55, 8-60, 8-
62, 8-66, 8-67, 8-68,
8-69, 9-3
Prewarning limit 6-20
PROFIBUS 10-2 7
Profibus 4-3
Profibus interface 4-3
Protection against voltage failure 6-21
Protective functions 5-34
PTC thermistors 6-22
Pump stop 5-23, 6-12
Q
Quick start menu 5-6, 5-7
R
Rated motor current 3-6
Rated operating speed 6-16
Rated operating torque 5-12
Reduce starting current 1-2
Relative humidity 10-4
Restart 3-4
Restore basic factory settings 2-7, 5-40
Reversed direction of rotation 9-6
Reversing operation 9-10
Run-up recognition 6-3, 6-5, 6-9, 6-10
S
Safety 5-48
Save settings 5-38
Saving options 5-37
Screw-type terminals 3-10
Selection criteria 1-7
Semiconductor fuse 3-9, 6-23
Semiconductor protection 9-2
Settings 5-9, 5-38, 5-39
SITOR 3-9, 6-23
SITOR fuses 3-9
SITOR semiconductor fuse 6-23
Slow speed factor 6-16
Slow speed function 6-16, 9-8
S
low speed paramete
rs 5-26
Slow speed torque 6-16
Soft Starter ES 10-27
Soft starters
for high-feature applications
Box terminal block 10-2 8
Covers 10-28
Fans 10-28
PC cable 10 - 27
Software 10-27
Soft stop 5-22
Software 2-2, 4-3
Spare parts 10-28
Spring-loaded terminals 3-10
Standard circuit 3-5, 9-2
Standards 3-2
Start torque 1-2, 1-4, 6-3, 6-5, 6-7
Start voltage 6-3
Starting 1-6
Starting current 1-2
Starting mode 5-13
Starting the motor starter 8-22