Siemens SITRANS FUS380 - Page 103

Parameter Default val‐
ue
Value
range
Access
level
Description
228 Parameter checksum fault
appears
Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
229 Parameter checksum fault
disappears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
230 Low power alarm output en‐
able
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
231 Low power fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
232 Low power fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
233 Low power fault appears Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
234 Low power fault disappears Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
235 Flow overflow alarm output
enable
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
236 Overflow fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
237 Overflow fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
238 Overflow fault appears Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
239 Overflow fault disappears Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
240 Pulse A overload alarm out‐
put enable
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
241 Pulse A overload fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
242 Pulse A overload fault coun‐
ter
e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
243 Pulse A overload fault ap‐
pears
Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
244 Pulse A overload fault disap‐
pears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
245 Pulse B overload alarm out‐
put enable
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
246 Pulse B overload fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
Parameter lists
A.3 Diagnostics
SITRANS FUS380/FUE380
Operating Instructions, 05/2018, A5E00730100-AE 103