Siemens SITRANS FUS380 - Page 104

Parameter Default val‐
ue
Value
range
Access
level
Description
247 Pulse B overload fault coun‐
ter
e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
248 Pulse B overload fault ap‐
pears
Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
249 Pulse B overload fault disap‐
pears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
250 Consumption alarm output
enable
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
251 Consumption fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
252 Consumption fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
253 Consumption fault appears Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
254 Consumption fault disap‐
pears
Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
255 Leakage alarm output ena‐
ble
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
256 Leakage fault hours e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
257 Leakage fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
258 Leakage fault appears Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
259 Leakage fault disappears Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
260 Empty pipe alarm output en‐
able
Yes No, Yes R/W Select "Yes" to enable active alarm on alarm
output / call-up
261 Empty pipe fault timer e.g. 0 h 0 to 65535 Read Total hours fault active.
Valid only if alarm is enabled
262 Empty pipe fault counter e.g. 0 0 to 65535 Read Total number of faults.
Valid only if alarm is enabled
263 Empty pipe fault appears Last fault
appear date
dd-mm-
yyyy,
hh:mm:ss
Read First time the fault appeared.
Valid only if alarm is enabled
264 Empty pipe fault disappears Last fault
disappear
date
dd-mm-
yyyy,
hh:mm:ss
Read Last time the fault disappeared.
Valid only if alarm is enabled
Service
Parameter lists
A.3 Diagnostics
SITRANS FUS380/FUE380
104 Operating Instructions, 05/2018, A5E00730100-AE