Siemens SITRANS P DS III - Scope of Instructions and Consignment Check

Introduction
1.4 Scope of the instructions
SITRANS P DS III with PROFIBUS PA
12 Operating Instructions, 06/2013, A5E00053276-07
Edition
Remark
06/2013 All safety information has been revised.
The following chapters have also been changed:
• "Functional safety" chapter
• "Technical data" chapter
1.4
Scope of the instructions
Table 1- 1 "7MF4.34" stands for:
Order number
SITRANS P, DS III series for
7MF4034
Gauge pressure
7MF4134
Gauge pressure, flush mounted diaphragm
7MF4234
Absolute pressure from the gauge pressure series
7MF4334
Absolute pressure from the differential pressure series
7MF4434 Differential pressure and flow rate, PN 32/160 (MAWP
464/2320 psi)
7MF4534
Differential pressure and flow rate, PN 420 (MAWP 6092 psi)
7MF4634
Level
1.5
Checking the consignment
1. Check the packaging and the device for visible damage caused by inappropriate handling
during shipping.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
See also
Return procedure (Page 183)